Home > CDP & LLDP Questions 3

CDP & LLDP Questions 3

March 24th, 2018 in SWITCH 300-115 Go to comments

Question 1

Question 2

Question 3

Explanation

The information contained in Cisco Discovery Protocol advertisements varies based on the type of device and the installed version of the operating system. Some of the information that Cisco Discovery Protocol can learn includes:
+ Cisco IOS version running on Cisco devices
+ Hardware platform of devices
+ IP addresses of interfaces on devices
+ Locally connected devices advertising Cisco Discovery Protocol
+ Interfaces active on Cisco devices, including encapsulation type
+ Hostname
+ Duplex setting
+ VLAN Trunking Protocol (VTP) domain
+ Native VLAN

Type-Length-Value (TLV) fields are blocks of information embedded in Cisco Discovery Protocol advertisements. Information in advertisements varies, and the TLV frame format allows for extending advertisements when needed.

CDPv2 advertises IP Network Prefix TLV contains a list of network prefixes to which a sending device can forward IP packets. A prefix includes the interface protocol and the port number. For example, Ethernet 1/0. 

Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cdp/configuration/15-mt/cdp-15-mt-book/nm-cdp-discover.html

Question 4

Question 5

Question 6

Question 7

Question 8

Explanation

These organizationally specific LLDP TLVs are also advertised to support LLDP-MED.
+ Port VLAN ID TLV ((IEEE 802.1 organizationally specific TLVs)
+ MAC/PHY configuration/status TLV(IEEE 802.3 organizationally specific TLVs)

Reference: https://www.cisco.com/c/en/us/td/docs/switches/metro/me3400/software/release/12-2_50_se/configuration/guide/scg/swlldp.pdf

Question 9

Explanation

The switch supports these basic management TLVs. These are mandatory LLDP TLVs.
+ Port description TLV
+ System name TLV
+ System description TLV
+ System capabilities TLV
+ Management address TLV

Comments
  1. SAZA
    March 24th, 2018

    where is the questions ???? please update the question file at SWITCH FAQs & Tips page
    https://www.certprepare.com/switch-faqs-tips

  2. Senjen
    March 25th, 2018

    HERE Instant DOWNLOAD
    20 US$ only
    D&D – PortFast / BPDU Guard / BPDU Filter (Official)
    D&D – Port Cost / Switch Port Priority / Port Priority
    D&D – STP Components (Official)
    D&D – LLDP-MED TLVs

    vtp simplet
    AAA Dot1x numbered ACL
    LACP-STP on physical interface

    Copy below link
    ITS INSTANT DOWNLOAD

    docs.google.com/document/d/1uNus4y1-rXi7PC78hOzp8HX8rC-f_TyjoNhSe9JlC5Q/edit

  3. Anonymous
    March 27th, 2018

    all theory questions are new:

    Instead of lacp, its Pag
    Question 22
    Which two commands sequences must you enter on a pair switches so that they negotiate? (Choose two)
    A. channel-protocol lacp
    channel-group 1 mode auto
    B. channel-protocol lacp
    channel-group 1 mode passive
    C. channel-protocol pagp
    channel-group 1 mode on
    D. channel-protocol pagp
    channel-group 1 mode auto
    E. channel-protocol lacp
    channel-group 1 mode active

    Which two statements about HSRP are true? (Choose two)
    A. You must manually configure ICMP redirect messages on HSRP interfaces
    B. It is supported on switch virtual interfaces and routed ports
    C. Primary and secondary HSRP switches forward traffic in a round-robin style
    D. The interfaces in a HSRP group share a virtual MAC address
    E. An HSRP group can support a maximum of eight switches

    Answer: B D

    Question 2
    Refer to the exhibit. Which two statements about the network environment of the device that generated this output are true? (Choose two)

    A. The exhibit hello and hold timer values are in use
    B. The standby router can take the active HSRP if it fails to receive a hello packet from the active router within 1.616 seconds
    C. The priority value of the HSRP group is 1
    D. HSRP version 2 is in use
    E. The standby router can take the active HSRP role if it fails to receive a hello packet from the active router within 10 seconds

    Answer: A D

  4. Anonymous
    March 27th, 2018

    Hello, I urgently need a question bank, who can give me thank you
    {email not allowed}

  5. CCNP
    April 7th, 2018

    Q2
    vtp relies on CDP to carry VTP domain information?????????

  6. CCNP
    April 12th, 2018

    Q 4 please…….

  7. kingkong
    May 3rd, 2018

    Hello Guys
    Latest Update the new CCNA dumps
    100% Real CCNA Exam Questions
    visit:
    dumps pro
    dot
    com

  8. GonnaExpire
    May 12th, 2018

    I just failed, most of my questions were not here. I only recognise the sims and a few others.

  9. Sen
    May 13th, 2018

    @GonnaExpire
    did u prepare from this site only?

  10. Anonymous
    May 20th, 2018

    Q9 – System description is not a mandatory TLV

    https://learningnetwork.cisco.com/docs/DOC-26851

  11. Bob
    June 1st, 2018

    Agree with GonnaExpire – Failed: Theres a lot of new Q’s, drag and drops, the Sims are the same.

  12. Bang
    June 6th, 2018

    After I have read Bob and GonnaExpire comments have some doubts.
    It is good to know that at least the SIMs are the same, but The lof of new questions…
    If there is a way to update the questions please do it fast.
    Gonna do my exam of the end of June.

    Also if there is any other site where the new questions can be found please share with us.

  13. agamemnon
    July 3rd, 2018

    Hi there! Passed today . Dumps still valid. Also simulations. New questions about HSRP – drag and drop, VRRP – how should a proper VRRP configured interface look like – sets of commands mixed with HSRP commands and some other but cant remember.If you will not only memorize these answers but also understand it you can pass. Cheers !

  14. Anonymous
    July 16th, 2018

    Hi guys, I plan to take CCNP Switch soon, so could anyone help with latest questions and update on current exam. thanks

  15. london
    July 17th, 2018

    @Anonymous I just passed yesterday (16 of July) I got 874, the minimum is 790. I paid 1 month of premium membership here. Honestly, I did not study that much, in total I spent around a solid 30 hours revising every question here plus labs. I read the whole book when I got my CCNA routing and switching, which took me about 6 months and that is after paying for a course. But I found that going straight to the questions here and understand the concept is better and faster. Most of the questions here have explanations which is very helpful and summaries the book. There is no way you will memorise over 600 questions, but if you understand the concept as you revise when the exam comes you will be able to filter out bad options on the multiple questions. On the other hand, labs were exactly the same here, word for word, memorise memorise labs.
    If you are really serious about a career on Network then 15 dollars should be an investment. Paying 15 dollars you are able to see all the questions plus you have simulators for the labs. There also a site I found they have dumps free but after going through the switch dumps I realise that the questions are taken from here but no explanations. http://www.aoowe.com/ccnp.html
    Labs here are the same, exactly the same. I found that some of the multiple questions are new and some modified, that’s why understanding the concept is so important.

  16. london
    July 17th, 2018

    By the way Cisco is raising the exam prices by the end of this month. That’s why I rush to do the exam yesterday! I heard the prices will go up by 15%!!!

  17. Kitty20
    July 30th, 2018

    i think everybody just go somewhere else

  18. chuba
    August 1st, 2018
  19. RED1
    August 16th, 2018

    I passed today successfully
    I suggest you to dont focus on CP LLDP, I had no question about LLDP mandatory, optional, LLDP-MED mLLDP …

    Focus on VTP and Spanning-tree
    Port security
    an dhcp snooping,
    HSRP
    VRRP
    many questions about these subjects

  20. RED1
    August 17th, 2018

    INSTATNT DOWNLOAD here

    200-125 CCNA = 486
    100-105 ICND1 = 347
    200-105 ICND2 = 268

    300-101 ROUTE = 146 SP0T0
    300-115 SWITCH = 831
    300-135 TSHOOT = 101

    400-101 WRITTEN = 248

    Copy below link:
    https://yumpu.com/xx/embed/view/fkSIdylaC9co2z7v

  1. No trackbacks yet.