Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@Brian
Thanks brother. wonderful work. we will keep in touch @ mycertexam.com
Which statement describes the result of configuring SPAN on a cisco device?
A. If not carefully planned,SPAN can leas ti loops between source and destinaron ports.
B. SPAN doubles trafric internally
C. SPAN blocks for normal use on additional Port for each configures source Port.
D. SPAN halves the capacity of the source Port.
Answer???.. A, B o C
can anyone please provide me link to ccnp troubleshoot 300-135 cbtnuggets videos….i already have the lab videos of cbt nuggets but the other theory part torrent CBT.Nuggets.Cisco.CCNP.Routing.Switching.300-135.TSHOOT-PRODEV is just not getting enough seeds
Which statement describes the result of configuring SPAN on a cisco device?
A. If not carefully planned,SPAN can leas ti loops between source and destinaron ports.
B. SPAN doubles trafric internally
C. SPAN blocks for normal use on additional Port for each configures source Port.
D. SPAN halves the capacity of the source Port.
Answer B
guys this question is confusing me
A switch has configured “vlan dot1q tag native”, what happens if a untagged packets (can’t remember it will be received or sending) on the trunk port?
A. native VLAN
B. default VLAN
C. ???
D. ???
Correct Answer: B
wont this packet be dropped as we are tagging the native vlan? and what if we change the native vlan to 99 (without “vlan dot1q tag native” command) and then if we receive untagged packet , where will this go, native vlan 99 or default vlan 1? and what is default vlan btw when we change the native vlan to 99, frankly my head is spinning right now
Passed today with 9xx/1000
All you need is certprepare. 5 – 6 new questions. I got premium.
HSRP, VTPv3, STP and LACP.
Picked all answers for sims according to this site. Did not apply configurations to port channel interfaces.
@ need2passswitch,
Main purpose of using the “vlan dot1q tag native” command is for ” security purpose “. for example.. So that it will stop VLAN Hopping attack.
i have labbed this question in real gears.. it drops the packet. do some simple google search buddy…
@need2passswitch vlan dot1q tag native will drop all untagged packets as the switch will expect packets destined for native VLAN to be tagged as well after that.
anyone knows the answer to this?
Which two statements about the LACP port priority of a device are true? (Choose two.)
A. To manually configure a link within an EtherChannel to come up first, set its LACP port-priority value
lower than the default.
B. LACP port-priority is used in the hashing algorithm to load-balance links within an EtherChannel.
C. The systems uses the port priority of the local and remote devices to determine which links in an
EtherChannel group are active.
D. It determines which links in an EtherChannel group are active.
E. To manually configure a link within an EtherChannel to come up first, set its LACP port-priority value
lower than the default.
which two statements about dynamic MAC address learning are true?(choose two)
A. Dynamically-learned MAC addresses can be cleared on a per-interface basis only
B. it must be enabled on ports with port security enabled
C. switch interfaces learn MAC addresses dynamically by default
D. it can be disabled on a per-vlan basis only
E. Dynamiccally-learned MAC addresses supersede static MAC addresses
C & ?
When a Layer 2 trunking EtherChannel is configured, which two attributes must match across the
member ports?
A. Interface Description.
B. Spanning-tree cost.
C. spanning-tree priority
D. allowed VLANS
E. trunking mode.
Getting Different Answers on dumps. some say BC others say DE
Hi Guys!
What are the questions I should have special attention?
There are several on the site and my exam is next Wednesday :(
Is the new questions enough?
which two statements about dynamic MAC address learning are true?(choose two)
A. Dynamically-learned MAC addresses can be cleared on a per-interface basis only
B. it must be enabled on ports with port security enabled
C. switch interfaces learn MAC addresses dynamically by default
D. it can be disabled on a per-vlan basis only
E. Dynamiccally-learned MAC addresses supersede static MAC addresses
C & B
anyone knows the answer to this?
Which two statements about the LACP port priority of a device are true? (Choose two.)
A. To manually configure a link within an EtherChannel to come up first, set its LACP port-priority value
lower than the default.
B. LACP port-priority is used in the hashing algorithm to load-balance links within an EtherChannel.
C. The systems uses the port priority of the local and remote devices to determine which links in an
EtherChannel group are active.
D. It determines which links in an EtherChannel group are active.
E. To manually configure a link within an EtherChannel to come up first, set its LACP port-priority value
lower than the default.
A=E – correct.
D (if there is any hardware limitation & need to put some links as stand by it will use priority)
Hello,
me exam is in few days, please answer me, we have nothing to configure in vtp v3 and hsrp sim ? only show command and we have to answer questions ?
Thank you
@Urgent send me ur email i will send u
When a Layer 2 trunking EtherChannel is configured, which two attributes must match across the
member ports?
A. Interface Description.
B. Spanning-tree cost.
C. spanning-tree priority
D. allowed VLANS
E. trunking mode.
Getting Different Answers on dumps. some say BC others say DE?
@Anonymous DE
Can someone confirm that latest file from certprepare is valid with 939q? Are we all studying that file?
Honestly, the dumps are full of mistakes… does anyone have like a corrected version? or like a document that they keep track of wrong answers? this is nutts… im studying wrong answers
Can anyone send me questions for 300-115 switch? I would be very grateful to him. My email is haydermax0(at)gmail(dot)com
@Waseem ciscozd92(at)gmail(dot)com
Which VTPv2 mode does the switch operate without participating in VTP?
A. client
B. server
C. transparent
D. off
Answer on this website is (C). I believe it should be (D), as the switch will still “participate” in VTP by relaying updates but without updating its own database.
Any comments?
@Anon for the L2 EtherChannel, based on the information below and the choices in the answer, D and E are valid answers.
A is irrelevant, B does not make the ports incompatible as per the last line in the text below, C seems to be irrelevant as well. D is clearly true as per the 3rd point text below and E is also true as per the 2nd point.
For Layer 2 EtherChannels:
– Assign all ports in the EtherChannel to the same VLAN, or configure them as trunks. Ports with different native VLANs cannot form an EtherChannel.
– If you configure an EtherChannel from trunk ports, verify that the trunking mode (ISL or IEEE 802.1Q) is the same on all the trunks. Inconsistent trunk modes on EtherChannel ports can have unexpected results.
– An EtherChannel supports the same allowed range of VLANs on all the ports in a trunking Layer 2 EtherChannel. If the allowed range of VLANs is not the same, the ports do not form an EtherChannel even when PAgP is set to the auto or desirable mode.
– Ports with different spanning-tree path costs can form an EtherChannel if they are otherwise compatibly configured. Setting different spanning-tree path costs does not, by itself, make ports incompatible for the formation of an EtherChannel.
Source: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swethchl.html
My exam is tomorrow please help!
we have nothing to configure in vtp v3 and hsrp sim ? only show command and we have to answer questions ?
Thank you
So there are roughly 1000 question plus labs. on premium. Are people honestly trying to learn the questions or just get a feel of what they are like. As I’ve been a CCNP for over 12 years and some of the questions here I would never know the answers to. And to go through the questions is taking far too many hours than I have spare. Opinion and thoughts please :-)
REPOST
My exam is tomorrow please help!
we have nothing to configure in vtp v3 and hsrp sim ? only show command and we have to answer questions ?
Thank you
Urgent , for the HSRP and VTP sim you just answer 4 questions on each from the sim using various show commands.
@Recert this week Personally I use this site to confirm my knowledge and make sure I’m not thrown off by some curveball questions. I basically skim through questions and compare what I think is correct with what the site and community say. If I get something wrong then I do some reading about it, test it in my lab etc. However I admit that some questions stuck in my head and I know the answer even before I finish reading it.
@Recert this week
thank you